 |
 |
 |
|---|
The scope of fire design in the manual refers to the Fire Rating requirements of floor systems in buildings. As such it makes reference to the acceptable solutions C/AS1 “Fire Safety” prepared by the Building Industry Authority as a way to satisfy the requirements of the New Zealand Building Code, for fire safety i Buildings. The scope of discussions covered in this manual however, is limited and should not replace the advice and designed prepared by fire engineering consultants familiar with preparing fire design for buildings.
The discussions here, is offered merely to provide possible directions for structural consultants to head, in consultation with their associated fire consultants on specific projects.
In particular comments include aspects where:
a) Buildings are referred to generally and as such are conceptual only. All actual buildings are case specific and require individual assessment in a complete fire design, which lies outside the scope of this document.
11.2 scope of manual - fire resistance calculation of tray flooring
11.6 mezzanines as intermediate floors (model type 4)
11.7 compliance with fire resistance requirements
11.8 - 30 minute fire rated composite floor
11.9 positive reinforced fire rated slabs
11.10 negatively reinforced fire rated slabs
11.11 negative reinforcement calculation
11.12 “slab specification” with regard to negative reinforcement calculation
11.13 loadings used in negative reinforcement tables
11.14 live loadings / fire ratings used
11.15 negative reinforcement tables
 |
|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|---|